USS Slater Header

 

Parts Needed


 

450 Volt AC three phase plug

Quantity needed = 6


Switchboard main circuit breaker brass handle

Quantity needed = 4


This style of Sound Powered Phone jack and box, non-metallic, with or without cap and chain, with  or without mounting brackets. The number and location of cable tubes is not important

Quantity needed = many


This style of Sound Powered Phone jack and box, metal, with or without cap and chain. The number and location of cable tubes is not important.

Quantity needed = many


Switchboard meters: This style (square). Volt, Ammeter, KW, Power Factor, Frequency, etc. We need all types - the entire meter is removed from the back by disconnecting the wires and two mounting nuts. We need the entire meter, including the face. We also need the face's corner screws - they are very unique.

Quantity needed = two of each type


WWII style bulkhead Fans

Quantity needed = many


Door switch box for Darken Ship lighting: entire box if this style, but also the arm & pivot mechanism from any style.

Quantity needed = 8


Bunk reading light, whole assembly or parts.

Quantity needed = 4


Multi Channel audio amplifier. Note that several manufacturers made these. One typical nameplate is shown, but similar ones are interchangable.

Quantity needed = 3


Ship's Announcing System (1MC) speaker - this style

Quantity needed = 10


Fuse box with switches: Four circuit. We really need the covers with the hinged door in middle. We also need the rotary snap switches.

Quantity needed = 4


Alarm annunciator - two OR four channels. We need all internal parts.

Quantity = ten channels of parts


Light switch, navy rotary snap switch style. These wear out with long-term use.

Quantity needed: many


450 Volt three phase AC motor controllers - especially if the internals look like this.

Quantity needed = 6


Sound powered phone handset BRACKET - this style (not the more modern brass ones) Urgent need for six to help restore the engineroom talkers' areas.



Pressure switch used in automatic machinery control such as compressed air, refrigeration, etc.

Quantity needed = 8


Oval hatch, handwheel, spring, dogging mechanism coaming (essentially the whole assembly - Slater has four ofthese on the weather deck, all are corroded to the point of failure)

Quantity needed = 4


Linear thermometers. These screw into a threaded well that is welded into a tank wall or pipe. All you need to remove these are channel lock pliers. Be careful, since some of these contained mercury. Slater needs many of these to complete or machinery space restoration.

Quantity needed = many


WWII era valves valve handwheels

Quantity needed = many


Pressure switch used in automatic machinery control such as compressed air, refrigeration, etc.

Quantity needed = 8


WWII era lifeline turnbuckles and hardware. These are bronze. Please send us the whole lifeline, we'll cut or splicethem to our needs.

Quantity needed = 20